Data Fields
| uint32_t | id |
| struct PP_FloatPoint | position |
| struct PP_FloatPoint | radius |
| float | rotation_angle |
| float | pressure |
Detailed Description
The PP_TouchPoint struct represents all information about a single touch point, such as position, id, rotation angle, and pressure.
Field Documentation
| uint32_t PP_TouchPoint::id |
This value represents the identifier for this TouchPoint.
The id corresponds to the order in which the points were pressed. For example, the first point to be pressed has an id of 0, the second has an id of 1, and so on. An id can be reused when a touch point is released. For example, if two fingers are down, with id 0 and 1, and finger 0 releases, the next finger to be pressed can be assigned to id 0.
This value represents the x and y pixel position of this TouchPoint relative to the upper-left of the module instance receiving the event.
| float PP_TouchPoint::pressure |
This value represents the pressure applied to this TouchPoint.
This value is typically between 0 and 1, with 0 indicating no pressure and 1 indicating some maximum pressure. Scaling differs depending on the hardware and the value is not guaranteed to stay within that range.
This value represents the elliptical radii, in screen pixels, in the x and y direction of this TouchPoint.
This value represents the angle of rotation in degrees of the elliptical model of this TouchPoint clockwise from "up.".
The documentation for this struct was generated from the following file: